Premier Scaffolding Dealers & Suppliers

About Premier Scaffold Solutions

Overview: Premier Scaffold Solutions (PSS) is an American manufacturer of mast climbing work platforms, founded in 2009 by its sister company TNT Equipment Co. of Columbus, Ohio. Premier's flagship product is the ProSeries mast climber, a made-in-USA platform designed for masonry, block, and stone work, sold through a network of dealers and rented through TNT.

Premier grew out of decades of hands-on rental experience at TNT Equipment, which saw how contractors used mast climbers in the field and where existing designs fell short. The company refined an existing mast climber design based on customer feedback and testing, then moved production to the United States, launching the Made in USA ProSeries at the World of Concrete show.

The ProSeries is built for heavy masonry loads, with modular bridging that adapts to difficult building configurations and tight sites such as college campuses. Updates over time added hot-dip galvanized frames inside and out and aluminum diamond plate top sheets for durability, along with a lighter base that can be moved around the job site with a forklift. Through Scaffold Exchange, you can find Premier mast climbers and the providers who sell, rent, and service them.

Premier ProSeries Features

Premier's ProSeries mast climber is built around durability and heavy masonry work. Key features include the following.

Made in USA

ProSeries Mast Climber

An American-built mast climbing work platform for brick, block, and stone, refined from field feedback and testing.

Configuration

Modular Bridging

Bridge sections that adapt the platform to difficult building shapes and long wall runs.

Durability

Galvanized Frames

Frames hot-dip galvanized inside and out for corrosion resistance and long service life.

Decking

Aluminum Diamond Plate Decks

Aluminum diamond plate top sheets for a durable, slip-resistant working surface.

Mobility

Forklift-Movable Base

A lighter base that can be repositioned around the job site with a standard construction forklift.

Where Premier Mast Climbers Are Used

Premier mast climbers are used mainly on masonry and facade projects, including the following.

Brick and block wall construction

Heavy stone and veneer facades

College and university buildings

Schools and institutional projects

Commercial and retail construction

Tight urban and campus job sites

Buildings with complex wall layouts

Masonry contractor and rental fleets

How Premier Compares to Other Manufacturers

Premier is one of several manufacturers of mast climbing equipment for masonry. Here is how it compares.

Hydro Mobile - CAN Mfr.

Canadian mast climber manufacturer

Heavy-duty M-Series and compact P-Series
Rack and pinion and transport platforms
Built in Canada
Best for masonry and heavy facade work

Klimer Platforms - CAN Mfr.

Ontario mast climber manufacturer

KPM-8, KlimerLite, and Hydek platforms
Transport platforms
Engineering, installation, and training
Best for multi-trade project solutions

Premier - US Mfr. ← You are here

Made-in-USA mast climbers

ProSeries mast climber
Modular bridging and galvanized frames
Backed by TNT Equipment rental
Best for masonry and stone work

Hydek - US Mfr.

Hydraulic masonry mast climbers

Gas-powered hydraulic drive
High-capacity work decks
Built for heavy masonry loads
Best for brick and block contractors

Non-Stop Scaffolding - US Mfr.

Elevating crank-up scaffolding

Platform raised by crank
No engine or hydraulics
Shafts, stairwells, and tight sites
Best for low and mid-rise masonry

OSHA Compliance & Safety Standards

OSHA does not have a standard written specifically for mast climbing work platforms, so on U.S. construction sites they are generally held to OSHA's scaffold requirements in 29 CFR 1926.451, along with the manufacturer's instructions. The consensus standard ANSI/SAIA A92.9 covers mast climber design, installation, use, and training in more detail.

Installed per the manufacturer's instructions and engineering
Mast ties and anchors installed at the specified spacing
Rated load posted and never exceeded
Guardrails on all open sides of the platform
Installers and operators trained on the equipment
Inspected by a competent person before each shift

OSHA Standard 29 CFR
1926.451

Scaffolds — General Requirements — U.S. Construction Regulations

OSHA Interpretations & Rulings →

Frequently Asked Questions

Premier mast climbers are made by Premier Scaffold Solutions, a U.S. manufacturer founded in 2009 by its sister company, TNT Equipment Co. of Columbus, Ohio.

The ProSeries is Premier's made-in-USA mast climbing work platform for masonry, block, and stone work. It features modular bridging, hot-dip galvanized frames, and aluminum diamond plate decking.

Yes. Premier mast climbers are sold through dealers and are also available to rent through Premier's sister company, TNT Equipment, and other rental providers.

The ProSeries was designed with a lighter base so it can be repositioned around the job site with a construction forklift. Always follow the manufacturer's instructions for moving and setting the unit.

There is no OSHA standard specific to mast climbers, so OSHA generally applies its scaffold rules in 29 CFR 1926.451. The ANSI/SAIA A92.9 standard covers mast climbing work platforms in detail. Visit the OSHA website for full interpretations and rulings.

Use the Scaffold Exchange map to search by your location and filter by manufacturer. You can see which providers sell, rent, or service Premier mast climbers and contact them directly through the platform.

Premier - US Mfr.