EZ Crank Up Scaffold Dealers & Suppliers

About EZ Crank Up Scaffold

Overview: EZ Scaffold (EZ Distributing, Inc.) is a Tennessee-based U.S. company that supplies crank-up scaffolding and mast climbing work platforms, primarily for the masonry industry. Its EZ Crank Up Scaffold uses towers connected by long bridges that support a work platform, which crews raise with a crank to keep the platform at the right height as the wall rises.

Crank-up scaffolding was developed for masonry work, where the wall rises steadily and the best working height changes throughout the day. Instead of building another level of frame scaffold and moving materials up, crews crank the work platform and material deck up the towers. That keeps masons at a comfortable working height, reduces bending and reaching, and cuts the time spent climbing, re-planking, and restocking.

EZ Scaffold's crank-up system is promoted for its long 21-foot bridges, which give more room and capacity between towers, and the company also offers single and twin-mast climbers for larger projects. Its equipment is used by masonry, concrete block, and stone contractors on commercial, institutional, and residential work. Through Scaffold Exchange, you can find EZ Crank Up Scaffold and the providers who sell, rent, and service it.

EZ Scaffold Products

EZ Scaffold focuses on adjustable-height access for masonry and facade work. Main products and components include the following.

Crank-Up

EZ Crank Up Scaffold

Tower scaffolding with a work platform that is raised by crank, keeping masons and materials at the ideal height.

Bridges

21-Foot Bridges

Long bridge sections between towers that create more working room and capacity along the wall.

Towers

Towers & Base Sections

Vertical tower sections added as the wall rises, with bases sized for the ground or slab conditions.

Mast Climbers

Single & Twin-Mast Climbers

Powered mast climbing work platforms for larger facades and higher-capacity projects.

Platforms

Work & Material Decks

Separate working and material platforms that keep block, brick, and mortar within reach of the crew.

Where EZ Crank Up Scaffold Is Used

EZ Crank Up Scaffold is used mainly on masonry and wall construction projects, including the following.

Brick and block wall construction

Stone veneer and cladding

Schools and institutional buildings

Commercial and retail construction

Elevator shafts and stairwells

Gymnasiums and tall single-story walls

Multi-family and residential projects

Masonry contractor fleets

How EZ Crank Up Compares to Other Manufacturers

EZ Scaffold is one of several manufacturers of adjustable-height access for masonry and facade work. Here is how it compares.

Dunlop Mastclimbers - US Mfr.

U.S. mast climber specialist

Powered mast climbing platforms
Curved and custom configurations
Taller structures than crank-up
Best for complex and curved structures

Hydek - US Mfr.

Hydraulic mast climbing systems

High-capacity hydraulic mast climbers
Popular with masonry contractors
Powered rather than hand-cranked
Best for heavy masonry loads

EZ Crank Up Scaffold - US Mfr. ← You are here

Crank-up masonry scaffolding

Platform raised by crank as walls rise
Long 21-foot bridges
Also offers mast climbers
Best for masonry wall construction

Fraco Mast Climbers - CAN Mfr.

Canadian mast climber manufacturer

Mast climbing work platforms
Transport platforms and hoists
Built in Canada
Best for large facade projects

Bil-Jax - Premier US Mfr.

U.S. scaffold and access equipment

Frame, systems, and rolling scaffolds
Fixed-level scaffold platforms
Broad scaffold product range
Best for U.S. contractors and rental fleets

OSHA Compliance & Safety Standards

On U.S. construction sites, crank-up scaffolding falls under OSHA's scaffold requirements in 29 CFR 1926.451. Platforms must support their rated load, be fully planked or decked, and have guardrails where required. Scaffolds must sit on firm foundations, be tied or braced as the manufacturer specifies, and be inspected by a competent person before each shift. Workers should never ride a platform while it is being raised unless the manufacturer's instructions allow it.

Erected and raised per the manufacturer's instructions
Towers on firm, level foundations
Ties and bracing installed as specified
Rated loads on work and material decks not exceeded
Guardrails on open sides of the platform
Inspected by a competent person before each shift

OSHA Standard 29 CFR
1926.451

Scaffolds — General Requirements — U.S. Construction Regulations

OSHA Interpretations & Rulings →

Frequently Asked Questions

Crank-up scaffolding uses vertical towers and a work platform that is raised with a crank as the work progresses. It is mainly used for masonry, where keeping the platform at the right height relative to the wall improves productivity and reduces strain on workers.

EZ Crank Up Scaffold is made by EZ Scaffold (EZ Distributing, Inc.), a U.S. company based in Tennessee that also offers single and twin-mast climbing work platforms.

Frame scaffolding is built in fixed lifts, so crews must add levels and move materials as the wall rises. Crank-up scaffolding raises the platform in small increments, keeping masons at a comfortable height and materials within reach, which can reduce labor and restocking time.

Mast climbers are powered and generally suited to taller buildings, longer facades, and heavier loads. Crank-up scaffolding is often a good fit for low and mid-rise masonry, shafts, and stairwells. The right choice depends on wall height, length, load, and site conditions.

Crank-up scaffolds on construction sites fall under OSHA 29 CFR 1926.451, which covers capacity, platforms, guardrails, foundations, and inspection. Always follow the manufacturer's instructions as well. Visit the OSHA website for full interpretations and rulings.

Use the Scaffold Exchange map to search by your location and filter by manufacturer. You can see which providers sell, rent, or service EZ Crank Up Scaffold and contact them directly through the platform.

EZ Crank Up Scaffold - US Mfr.